Built-in panel PA16
Application:
For installation in a pylon or façade casing.
Description:
Display in the form of a panel for installation in an external pylon. LED matrix, 10 mm, weatherproofed, designed for installation without windshield. The board optionally equipped with a light sensor regulating the brightness of the matrix. A light sensor led out on a 50cm long cable should be pasted into a 6mm hole in the pylon front.
Technical data:
Dimensions (W x H x D): 345 x 185 x 70 mm
Weight: approx. 2.0 kg
Working principle: RGB matrix animated with LED SMD 16x32 pixel technology
Assembly: In the outer pylon through a cut window. The front of the die is extended by the front panel of the pylon. The die front has IP65 tightness
Field variable: 160 mm high, RGB, brightness min 5000cd / m2
Power supply: 230 V AC I = max 0.7A
Power consumption: 30W max
Communication bus: Addressable RS485 address 0 to 63. Speed 9600, E, 8.1. Optional galvanic isolation up to 1kV. The possibility of autonomous work with one branch of detectors max 16 pieces. A communication protocol dedicated to the VIPark system
Working temperature: -35 ° C - + 70 ° C
Degree of protection: IPS4, front of the IP65 matrix
Housing: Frame: aluminum profile powder painted in 9005 (black). Back: gr. 2mm, dibond
Mounting method: Pasted in the opening of the pylon front
Programmed parameters: Display address
Connectors: 50cm long cables lead through cable glands from the top of the display
Cable entry: PG9 gland
Switches: \ 'Reset \' and 'Setup' button hidden inside the case. Used only at the system configuration stage
Permanent graphics: None